TAPETTIPOHJAMAALI Wallpaper primer

       

Water-borne white acrylate dispersion paint for indoor use. Finish: full-matt.

The product has been classified to Group M1 in Emission Classification of building materials.

For priming on new and previously painted concrete, filler and building board surfaces that will be covered with paper, vinyl or fibre based wallpaper, as well as for fastening and priming of fibreglass cloth.

Ready-to-use fillers from TEKNOSPRO series or other fillers which don't easily dissolve in water after drying are recommended for surfaces to be wallpapered.

Tehnilised andmed

Solids

About 34 % by volume

Volatile organic compound (VOC)

EU VOC limit value (kat A/a): 30 g/l. The product's VOC: max. 30 g/l.

Practical spreading rate

4 - 8 m²/l depending on the absorbency of the substrate

Density

abt. 1.3 g/ml

Drying time at +23 °C / 50 % RH

- dust free

- fit for wallpapering

after ½ h

the following day

The drying will be slowed down if the air is cool and/or humid.

Thinner, clean up

Water. Wash the equipment immediately after use with detergent and warm water.

Finish

Full-matt

Colours

White

Washability and wear resistance

Wet scrub resistance, class 2 according to EN 13300 (ISO 11998).

Packages (availability varies by country)

White: 2,7 L, 9 L

SAFETY MARKINGS

See Safety Data Sheet.

Kasutusjuhendid

Surface preparation

Clean the surface from dirt and dust.

Wash previously painted, dirty surfaces with RENSA SUPER paint cleaner.

Matt down hard or gloss surfaces by sanding and thereafter remove the dust.

For smoothing of irregularities in the surface choose a suitable stopper from the TEKNOSPRO series. The dried stopper is sanded down and the dust removed.

Application

Before use stir the paint thoroughly.

Apply by roller, spray or brush.

Recommended nozzle size for airless spray is 0.017 - 0.021".

Conditions

The surface to be painted must be dry. During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +5 °C and the relative air humidity below 80 %. Drying is faster in low air humidity and/or above + 21 °C.

Taking into use

The surface painted with TAPETTIPOHJAMAALI can be wallpapered and/or top coated under normal conditions the following day.

Storage

Must not freeze.

Tootekirjeldustes esitatud andmed põhinevad laboratoorsetel katsetel ja toodete praktilisel kasutamisel. Kõik esitatud väärtused on suunavad ning olenevad muu hulgas toonist ja läikeastmest. Kuna me ei saa mõjutada värvi kasutus- või tööolusid, vastutame ainult värvi kvaliteedi eest ning tagame, et see vastab Teknose kvaliteedikinnitusele. Me ei vasta kahjude eest, mis tulenevad toote kasutamisest kasutusjuhendi või -otstarbe vastaselt. Meie koduleheküljelt www.teknos.com leiab ajakohased versioonid tootekirjeldustest, ohutusjuhenditest ja süsteemikirjeldustest.