RENSA FACADE Facade cleaner

   

RENSA FACADE is an efficient detergent for washing external surfaces of buildings and pre-treating surfaces before painting. It removes dirt, mould, algae growth and other impurities which may weaken the adhesion of the paint.

RENSA FACADE can be used on all constructional surfaces, which endure cleaning with water: wood, concrete, plaster etc. and old painted surfaces.

Because the detergent does not harm the most common paint surfaces, it can be used diluted also as a maintenance cleaner.

RENSA FACADE is environmentally friendly and biodegradable.

It meets the requirements by OECD and by the Detergent regulation of European Parliament and the Council on detergents for biodegradability of all used raw material (OECD 301B, EC 648 / 2004).

Tehnilised andmed

pH

abt. 11

Dilution

For washing of and pre-treating surface to be painted: 1 : 10 (1 litre of detergent to 10 litres of water)

For very dirty/mildewed surfaces: 1 : 1 – 1 : 5

For maintenance cleaning: 1 : 15 – 1 : 20

Spreading rate

abt. 50 m² / 1 l undiluted detergent.

Absorption of the surface, dirtiness, air humidity etc. factors affect considerably on the spreading rate.

Ingredients of RENSA FACADE detergent

INCI name

Aqua

Potassium carbonate

Trideceth-4

Phosphoric acid, monodecyl ester, potassium salt

Lauramine oxide

Citric acid

CAS

7732-18-5

584-08-7

69011-36-5

68427-32-7

308062-28-4

77-92-9

If needed, please contact sds@teknos.fi for the full ingredient data sheet.

Packages (availability varies by country)

1 L, 5 L

SAFETY MARKINGS

See Safety Data Sheet.

Kasutusjuhendid

Dilute RENSA FACADE with water depending on the purpose of its use:

For washing of and pre-treating surface to be painted: 1 : 10 (1 litre of detergent to 10 litres of water)

For very dirty/mildewed surfaces: 1 : 1 – 1 : 5

For maintenance cleaning: 1 : 15 – 1 : 20

Wet porous surfaces, such as untreated wood, plaster etc., with water before applying the detergent. This prevents the detergent from absorbing too much and drying too fast.

Apply the detergent to the surface to be cleaned by using e.g. a brush or low-pressure spray (so-called garden spray). Let it act for abt. 20 minutes. Enhance the cleaning effect by brushing. The detergent must not dry on the surface to be cleaned - wet the surface again with the washing fluid, if needed.

Rinse the surface thoroughly with clean water. When using a pressure washer avoid excessive wetting of the wooden structures, such as weatherboards and outer walls.

Protection

RENSA FACADE is an efficient, but environmentally friendly and biodegradable product.

However, using the detergent must be followed with a reasonable caution.

Avoid skin contact and breathing the spray mist. Protect eyes from splashes.

More information from product's Material Safety Data Sheet.

The detergent does not harm garden plants, but avoid unnecessary splashing. The most sensitive plants can be covered or wetted with water before the treatment.

The detergent does not harm the surfaces to be cleaned, but avoid unnecessary splashing. For the most delicate materials, e.g. textile surfaces, must be ensured efficient protection and suitability of the product by testing the effects on a small, unnoticeable area of the surface to be treated.

ADDITIONAL INFORMATION

MUST NOT FREEZE.

Tootekirjeldustes esitatud andmed põhinevad laboratoorsetel katsetel ja toodete praktilisel kasutamisel. Kõik esitatud väärtused on suunavad ning olenevad muu hulgas toonist ja läikeastmest. Kuna me ei saa mõjutada värvi kasutus- või tööolusid, vastutame ainult värvi kvaliteedi eest ning tagame, et see vastab Teknose kvaliteedikinnitusele. Me ei vasta kahjude eest, mis tulenevad toote kasutamisest kasutusjuhendi või -otstarbe vastaselt. Meie koduleheküljelt www.teknos.com leiab ajakohased versioonid tootekirjeldustest, ohutusjuhenditest ja süsteemikirjeldustest.